Fiber Cutting Cypcut BCS200 Living Focus Contoller
- CYPCUT
- Shanghai,China
- 3 -4 working days after payment received
- 20 sets each month
1.BCS100 living focsu controller (also is called capacitive height controller ) is a high-performance control device which usedclosed-loop control method.
2.This CYPCUT liviing focus controller also provides a unique Ethernet communication (TCP / IP protocol) interface, it can easily achieve many functions with CypCut software.
3.This CYPCUT living focus controller oscilloscope functions to detect the capacitance in real time.
BS100 CYPCUT Living Focus Controller
BCS100 living focsu controller (also is called capacitive height controller ) is a high-performance control device which usedclosed-loop control method. This CYPCUT liviing focus controller also provides a unique Ethernet communication (TCP / IP protocol) interface, it can easily achieve many functions with CypCut software, such as automatic tracking of height,segmented piercing, progressive piercing, edge seek, leapfrog, arbitrary setting of lift-up height of cutting head.Its response rate is also improved greatly. Especially in servo control aspects, its running speed and accuracy should obviously be better than other similar products, owing to dual closed-loop algorithm of speed and position.
Sampling rate: 1,000 times per second.
Static measurement accuracy: 0.001 mm.
Dynamic response accuracy: 0.05 mm.
Following range: 0-25 mm.
The signal will not decay with strong capacity of resisting when the length of
signal transmission cable is up to 100m.
Support network communications and U disk online upgrade.
Adapt to any cutting head and nozzle.
This fiber cutting living focus controller support alarm while hitting the board and beyond the edge.
This CYPCUT living focus controller supports edge detection and automatic inspection.
Automatic calibration process, with fast and easy operations.
This fiber cutting living focus controller leapfrog and segmented piecring.
This CYPCUT living focus controller oscilloscope functions to detect the capacitance in real time.
When CO2 laser tube doesn't output laser and how to check CO2 power supply works normally? 1. Check if water circulation is normal(mainly check if water flows smoothly at cooling water outlet ). If not any water or water doesn’t flow smoothly, please check water pump and clear water pipe. 2.If water circulation is good, please check CO2 laser power supply. Check if power supply’s indicators ...more
