Jinan Ruby Laser Technology Co.,Ltd

MYJG 80W CO2 Laser Power Supply

  • MYJG 80W CO2 Laser Power Supply Manufacturers, MYJG 80W CO2 Laser Power Supply Factory, Supply MYJG 80W CO2 Laser Power Supply
  • MYJG 80W CO2 Laser Power Supply Manufacturers, MYJG 80W CO2 Laser Power Supply Factory, Supply MYJG 80W CO2 Laser Power Supply
  • MYJG 80W CO2 Laser Power Supply Manufacturers, MYJG 80W CO2 Laser Power Supply Factory, Supply MYJG 80W CO2 Laser Power Supply
  • MYJG 80W CO2 Laser Power Supply Manufacturers, MYJG 80W CO2 Laser Power Supply Factory, Supply MYJG 80W CO2 Laser Power Supply
MYJG 80W CO2 Laser Power Supply
  • Rubylasertech/ZYElaser
  • Jinan,China
  • 3-4 working days after payment receied
  • 400 sets each month

1. This 80W CO2 laser power supply is used for most brand 1200-1450mm CO2 laser tube which.adopts zero-current half-bridge soft-switch circuit to make sure the equipment has the advantages of high efficiency and rapid response speed.
2.This MYJG CO2 power supply’s control port is applicable to high/low level signal. TTL level is to control the on/off of the laser with an anomalistic protective switch to check water-flow and ventilation, etc.
3. Input analog signal(0~5V) or PWM is used to control the output power on this MYJG CO2 power supply. External LCD module can be used on this 80W CO2 power supply.

MYJG-80 80W CO2 Laser Power Supply

Feature

1. This 80W CO2 laser power supply is used for most brand 1200-1450mm CO2 laser tube which.adopts zero-current half-bridge soft-switch circuit to make sure the equipment has the advantages of high efficiency and rapid response speed.

2.This MYJG CO2 power supply’s control port is applicable to high/low level signal. TTL level is to control the on/off of the laser with an anomalistic protective switch to check water-flow and ventilation, etc.

3. Input analog signal(0~5V) or PWM is used to control the output power on this MYJG CO2 power supply.

4.This 80W CO2 power supply has RED TEST button to easliy figure out  CO2 power supply or CO2 laser tube’s failure. It is very easy adn simple to remove troube during machien working.

5. Externaol LCD screen which can show working current and power supply’s status can be shown.  It is optional.

6.Aging check before consignment:

Each MYJG CO2 laser power supply before selling will go through the aging check:

(1) sustain 10 hours at temperature 60 Degrees Celsius under full-load condition;

(2) 500 times on/off check for 7 seconds.

 CO2 laser power supply

80W laser power supply

Specification:    

Input AC Voltage

AC220V or AC110V

Input DC Voltage

DC 300V or DC150V

Input AC Frequency

47-440Hz

Max. Output Voltage

45KV

Max. Output Current

30mA(Depends on Laser tube)

Efficiency

91%

Over Current Protection

130% of Max. Current

Open circuit Protection

Yes (For short time)

Cooling

Fan Cooling

Voltage Range of High Level Control

Not Less Than3V

Voltage Range of Low Level Control

Not More Than0.8V

Working Temperature

-30 - +65 Degree Centigrade

Humidity

20-85%RH(No Dew)

 
Withstand
Voltage

Input-Output

AC1500V/MinNot More Than10mA

Input-Shell

AC1500V/MinNot More Than10mA

Output-Shell

Connected

Insulation

Not Less Than 50MOHM(DC500V)

Leakage Current

Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V)

Shock Resistance

Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours

MTBF

Not Less Than30,000hours

Full Load 60 Degree Centigrade test

12Hours

7 Seconds Start/Stop Test

500 Times

Dimension(LXWXH)

270mmx163mmx80mm

MYJG laser power supply

FAQ
How to check CO2 power supply works normally on laser machine
When CO2 laser tube doesn't output laser and how to check CO2 power supply works normally? 1. Check if water circulation is normal(mainly check if water flows smoothly at cooling water outlet ). If not any water or water doesn’t flow smoothly, please check water pump and clear water pipe. 2.If water circulation is good, please check CO2 laser power supply. Check if power supply’s indicators ...more
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right