Jinan Ruby Laser Technology Co.,Ltd

RECI DY10 80watt Laser Power Supplies

  • RECI DY10 80watt Laser Power Supplies Manufacturers, RECI DY10 80watt Laser Power Supplies Factory, Supply RECI DY10 80watt Laser Power Supplies
  • RECI DY10 80watt Laser Power Supplies Manufacturers, RECI DY10 80watt Laser Power Supplies Factory, Supply RECI DY10 80watt Laser Power Supplies
  • RECI DY10 80watt Laser Power Supplies Manufacturers, RECI DY10 80watt Laser Power Supplies Factory, Supply RECI DY10 80watt Laser Power Supplies
  • RECI DY10 80watt Laser Power Supplies Manufacturers, RECI DY10 80watt Laser Power Supplies Factory, Supply RECI DY10 80watt Laser Power Supplies
RECI DY10 80watt Laser Power Supplies
  • Rubylasertech/ZYElaser
  • Jinan,China
  • 3-4 days after payment received
  • 400 sets each month

1.This DY-10 laser power supplies adopt zero current and half bridge soft switch circuit which makes the power supplies have high efficiency and quick response speed. Thus it is easy to match with RECI 80-90watt CO2 laser tube.
2. TheI laser output power can be adjusted by 0-5V analog signal or PWM signal on this RECI laser power supplies.
3. This RECI laser power supplies are easy controlled, it is suitable to high or low level signal. The TTL level can control start or stop of laser output.

DY-10 80watt Laser Power Supplies

Features:

1.This DY-10 laser power supplies adopt zero current and half bridge soft switch circuit which makes the power supplies have high efficiency and quick response speed. Thus it is easy to match with RECI 80-90watt CO2 laser tube.

2.  TheI laser output power can be adjusted by 0-5V analog signal or PWM signal on this RECI laser power supplies.

3. This RECI laser power supplies are easy controlled, it is suitable to high or low level signal. The TTL level can control start or stop of laser output. While the 80watt power supplies has emergency protection switch which can indicate water through and ventilation.

4. Open circuit protection function can be realized on this DY10 laser power supplies. When protective earthing is good, the 80watt laser power supplies can be in open circuit status during short time. This function can protect power supply when  laser tube burst.

5.Aging test::Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified.


 DY10 laser power supplies

80watt laser power supplies

.Specification:

Input AC Voltage

AC220V or AC110V

Input DC Voltage

DC 300V or DC150V

Input AC Frequency

47-440Hz

Max. Output Voltage

45KV

Max. Output Current

30mA(Depends on Laser tube)

Efficiency

91%

Over Current Protection

130% of Max. Current

Open circuit Protection

Yes (For short time)

Cooling

Fan Cooling

Voltage Range of High Level Control

Not Less Than3V

Voltage Range of Low Level Control

Not More Than0.8V

Working Temperature

-30 - +65 Degree Centigrade

Humidity

20-85%RH(No Dew)

 
Withstand
Voltage

Input-Output

AC1500V/MinNot More Than10mA

Input-Shell

AC1500V/MinNot More Than10mA

Output-Shell

Connected

Insulation

Not Less Than 50MOHM(DC500V)

Leakage Current

Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V)

Shock Resistance

Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours

MTBF

Not Less Than30,000hours

Full Load 60 Degree Centigrade test

12Hours

7 Seconds Start/Stop Test

500 Times

Dimension(LXWXH)

270mmx163mmx80mm


Note:It has blue color aluminum case and screw terminal board 

RECI laser power supplies

FAQ
How to check CO2 power supply works normally on laser machine
When CO2 laser tube doesn't output laser and how to check CO2 power supply works normally? 1. Check if water circulation is normal(mainly check if water flows smoothly at cooling water outlet ). If not any water or water doesn’t flow smoothly, please check water pump and clear water pipe. 2.If water circulation is good, please check CO2 laser power supply. Check if power supply’s indicators ...more
How to check CO2 power supply works normally on laser machine
Common problem on CO2 laser tube of Laser Cutting Machine
Get the latest price? We'll respond as soon as possible(within 12 hours)
close left right