Jinan Ruby Laser Technology Co.,Ltd

ZYE 100watt CO2 Laser Power Source

  • ZYE 100watt CO2 Laser Power Source Manufacturers, ZYE 100watt CO2 Laser Power Source Factory, Supply ZYE 100watt CO2 Laser Power Source
  • ZYE 100watt CO2 Laser Power Source Manufacturers, ZYE 100watt CO2 Laser Power Source Factory, Supply ZYE 100watt CO2 Laser Power Source
  • ZYE 100watt CO2 Laser Power Source Manufacturers, ZYE 100watt CO2 Laser Power Source Factory, Supply ZYE 100watt CO2 Laser Power Source
  • ZYE 100watt CO2 Laser Power Source Manufacturers, ZYE 100watt CO2 Laser Power Source Factory, Supply ZYE 100watt CO2 Laser Power Source
ZYE 100watt CO2 Laser Power Source
  • Rubylasertech/ZYE
  • Jinan,China
  • 3-4 working days after payment received
  • 400 setes each monoth

1.This ZYE brand laser power source reaches high efficiency and fast response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 100W co2 laser tube.
2. This 100Watt laser power source can use ether external LCD digital display module or built-in LCD digtinal display module which can show power source’s working current,working statues and failure code.
3..Also this ZYElaser power source support wide input voltage. It is 180-240V which can protect transformer(flyback) from very high and short time peak voltage.

MYJG-100 100W CO2 Laser Power Source

Feature

1.This ZYE brand laser power source reaches high efficiency and fast response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 100W co2 laser tube. 

2.This 100W laser power source’s terminal control is simple and adapted to high and low level signals. TTL level can be used to control the start and stop of lasers. At the same time, an abnormal protection switch was added to detect whether the external water is ventilated or not.

3.Both analog signals of 0 to 5V and PWM signals are ok to control and regulate this CO2 laser power source’s output power.

4.This ZYE brand laser power source has open circuit protection functions:

5.With good grounding protection, the100watt laser power source can work in an open-circuit state for a short time, which can avoid the damage of the CO2 laser power source caused by the bursting of the laser tube.

6. This 100Watt laser power source can use ether external LCD digital display module or built-in LCD digtinal display module which can show power soruce’s working current,working statues and failure code.  It is very good function for both machine factory and machine users

10.Also this ZYElaser power soruce support wide input voltage. It is 180-240V which can protect transformer(flyback) from very high and short time peak voltage.  So both power supply and CO2 laser tube can be protected and reduce user’s lost.

CO2 laser power source

ZYE laser power source


Specification:

Item

MYJG-40

MYJG-60

MYJG-80

MYJG-100

MYJG-130

MYJG-150


30KV

35KV

45KV

50KV

50KV

50KV


20mA

23mA

30mA

30mA

35mA

38mA

Input AC Voltage

AC220V or AC110V

 Input DC Voltage

DC 300V or DC150V

Input AC Frequency

47-440Hz

Efficiency

91%

Over Current Protection

130% of Max. Current

Open Circuit Protection

Yes (For short time)

Cooling

Fan Cooling

Voltage Range of High Level Control

Not Less Than3V

Voltage Range of Low Level Control

Not More Than0.8V

Working Temperature

-30 - +65 Degree Centigrade

Humidity

20-85%RH(No Dew)

 

Withstand

Voltage

Input-Output

AC1500V/MinNot More Than10mA

Input-Shell

AC1500V/MinNot More Than10mA

Output-Shell

Connected

Insulation

Not Less Than 50MOHM(DC500V)

Leakage Current

Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V)

Shock Resistance

Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours

MTBF

Not Less Than30,000hours

Full Load 60 Degree Centigrade test

12Hours

7 Seconds Start/Stop Test

500 Times

Note: It has blue color aluminum case

100watt laser power source

FAQ
How to check CO2 power supply works normally on laser machine
When CO2 laser tube doesn't output laser and how to check CO2 power supply works normally? 1. Check if water circulation is normal(mainly check if water flows smoothly at cooling water outlet ). If not any water or water doesn’t flow smoothly, please check water pump and clear water pipe. 2.If water circulation is good, please check CO2 laser power supply. Check if power supply’s indicators ...more
Common problem on CO2 laser tube of Laser Cutting Machine
Common problem on CO2 laser power supply
Get the latest price? We'll respond as soon as possible(within 12 hours)
close left right