Laser engraving machine
Laser cutting machine
Laser marking machine
Jinan Ruby Laser Technology Co., Ltd
Address: C501 Room,C Unit,Kaibeite Building,Huaxin Road,Licheng District,Jinan,Shandong Province China. 250199
LC1390C CO2 Laser Engraving Machine
1. It adopts high quality CO2 laser tube, eg,Reci, EFR,Yongli or other brand. Focus lens or reflective mirrors are imported from USA.
2. Upgraded industrial CO2 laser head has laser adjustment screw. It can adjust output laser power and laser head location also can be adjusted too.
3.Stable structure and moving system, higher precision with long time service time.
4.Automatic lifting platform, lifting height is 200mm. Also it has blowing flame retardant,red light location and negative pressure adsorption function.
5. Single CO2 laser head and knife strip platform is default. Two CO2 laser heads and honeycomb platform is optional.
6. It has module guide rail which make sure the machine has high engraving accuracy and longtime service time.
7. Color display screen makes operation easy and friendly man-machine interface. It has laser cutting head movement control, output laser power control,engraving speed control, press key then engraving function, engraving border preview and U disk file reading functions.
8. It adopts DSP high speed processor which supports USDB 2.0 interface and U flash memory disk read and write file. It is good for mass engraving or cutting.
9. Laserdraw motherboard/Controller and coredraw software is default. LaserCAD/AUTOCAD/Ruida controller with RDworks software(Advanced DSP technology) are optional.
10. DSP high speed processor supports USDB 2.0 interface and U flash memory disk read and write file. It is good for mass engraving or cutting.
1.Laser- type:Sealed CO2 laser tube
2.Laser power:60W,80W,100W,130W or 150W
3.Engraving area:1200/1300/1400 x 900mm
4. Max engraving speed:0 - 60,000mm/min
5. Max cutting speed:0-3600mm
6.Resetting position accuracy:±0.05mm
7.Working voltage:AC 110 - 220V ±10%, 50 -60Hz
8.Operating temperature: 0 - 45℃
9.Operating humidity:5 - 95%
10.Minimum shaping character:English 1 x 1mm
11.Graphic format supported: BMP,PLT, DST, DXF and AI
12.Driving system: stepper
13.Cooling mode: water-cooling and protection system
14.Auxiliary equipments: Exhaust-fan, air-exhaust pipe
Laser- type:Sealed CO2 laser tube
2.Laser power:60W,80W or 100W
3.Engraving area:900 x 600mm/1000x900
4.Auto lifting platform:Yes
5. Working table: honeycomb/knife strip
6. Positioning accuracy: Less than 0.01mm
7.Compatible PC system: WINDOWS XP/7/8/10
8.Working voltage:AC 110 - 220V ±10%, 50 -60Hz
10. Cutting thickness:0-20mm(depends on material)
11.Minimum shaping character:English 1 x 1mm
12.Graphic format supported: BMP,PLT, DST, DXF,CDR and AI
13.Driving system: stepper
14.Cooling mode: water-cooling and protection system
15.Cutting speed: 0-50mm/s for laserdraw mothoerboard type, 0-100mm/s for
Ruida motherboard DSP type
16.Min line width: 0.1mm
17.Red light location:YES
18.Blowing flame retardant:YES
19.Water break protection unit: YES
20.Auxiliary configuration: Red light device, water pump,air pu
mp and fume extractor
wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials
advertisement, arts and crafts, leather, toys, garments, model , building upholster, computerized embroidery and clipping, packaging and paper industry