ZR-120W CO2 laser power supply

Feature:

1.The  laser power control is simple, the 220v Laser Power Source can uses 0-5V analog signal or PWM signal for laser power control.

2.The analog signal Laser Power Source has very good protection feature: The 120watt Laser Power Source has open circuit protection to make this HV Laser Power Source works for a short time in the open state, so as to make it avoid the laser tube broken.

3.The 120w Laser Power Source selects ordinary H/L/P/G/IN/5V port to receive control signal. And black steel outside shell is used on this analog signal Laser Power Source.

 4. The 120w Laser Power Source has good compatibility : This HV Laser Power Source can drive EFR,Yongli, SPT,Weiju and other brand 1450mm,1400mm or 1500mm  120Watt glass laser tube,besides this feature, the Hv Laser Power Source also has strong adaptability and fast response, engraving or cutting benefits good effect.

5.This 220vLaser Power Source has stable working performance: Each 120w Laser Power Source has been much more testing procedures and under full load high temperature (52~55 degrees celsius) 24 hours of aging, which ensure the stability of each CO2 laser power source.

6.This analog signal Laser Power Source has easy control: The 120w Laser Power Source uses high or low level for control. The use of TTL-level control can realize start and stop quickly. At the same time the HV Laser Power Source has a protection switch, testing is made by external water and ventilation

Specification